GYXTC8Y Mini Figure 8 Fiber Optic Cable
$0.75
Mini Figure 8 drop Fiber Optic Cable which is an excellent stripping performance of tight buffer fiber Cable, its diameter and bending radius are small. It’s full filling with aramid yarn. It can installation freely in narrow room.This cable consist of the loose tube with single mode or multimode fibers and steel wire as the messenger wire, which are formed like “Figure 8”. After aramid yarn is applied over the inner sheath, the cable is completed with a PE outer sheath.
0 in stock
Fiber Type：G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options
Application: Self supporting Aerial for FTTH Solution
Main Feature:
1，Accurate optical fiber excess length ensures good mechanical and temperature performance.,
2，High strength loose tube that is hydrolysis resistant and special tube filling compound and flexibility.
3，Figure 8 self supporting type structure possesses high tensile strength and is convenient for aerial installation and its installation cost is cheap.
4，The service life of the products willbe more 30 years.
5，Light, flexible, easy for the laying and it is used for FTTH solution.
Temperature Range:
Operating :-40℃ to +70℃
Storage :-40℃ to +70℃
Standards:
Comply with stand YD/T 1155-2001 as well as IEC60794-1.
Related products
Sale! 
The fibers are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of corrugated steel tape. Between the corrugated steel tape and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.
Sale! 
GYTC8S fiber optic cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around metallic central strength member into a compact and circular cable core, and the water-blocking materials are distributed into interstices of it. After a PSP/APL is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure
Sale! 
In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure