GYXTC8S Central Tube Figure-8 Fiber Cable
$0.65
In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure
0 in stock
Application: Self supporting Aerial
Characteristics：
1.Being used full section water retardant structure it possesses good water retardant and dampproof property.
2.Special factice is filled into inside of loosing jacket and takes key protection to optical fiber.
3.Vertical wrapped steel strip strengthens resisting lateral pressure ability
4.figure 8 self supporting type structure possesses high tensile strength and is convenient for aerial installation
and its installation cost is cheap.
5.The service life of the products will be more 30 years.
Temperature Range：
Storing temperature:-40℃ to +70℃
Operating temperature:-40℃ to +70℃
Standards：
Comply with stand YD/T 1155-2001 as well as IEC60794-1.
Related products
Sale! 
GYXTW53 is Double Armored and Double Sheathed central tube optical cable with a loose tube in the center of the cable, and two reinforcing members are located beside the loose tube. The number of GYXTW53 optical fiber cable cores is small, usually less than 12 cores,currently can reach 24 cores.
Product Name: Armored Double Sheathed Central Loose tube GYXTW53
Brand Place of Origin: GL Hunan,China (Mainland)
Application:
1. Adopted to Outdoor distribution.
2. Suitable for aerial duct and buried method.
3. Long distance and local area network communication.
Sale! 
In the GYTY53 cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. Then the cable is completed with a PE sheath. Which is filled with the filling compound to protect it. After PSP is applied over the inner sheath, the cable is completed with a PE outer sheath.
Sale! 
In the GYXTW cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices between them to guarantee the compactness and longitudinal water-blocking performance. Two parallel steel wires are placed at both sides of the cable core while PE sheath is extruded over it.
Product Name: Uni-tube Light-armored Cable (GYXTW)
Brand Place of Origin: GL Hunan,China (Mainland)
Application: Aerial/Duct/Outdoor