Sgooway 433MHz Wireless Window Door Magnet Sensor Detector For Home Wireless Alarm System wifi alarm gsm ** *
$8.12
10 in stock
433 Mhz Wireless Door Sensor Alarm Detector for Home Alarm System
- This door/window detector cannot be used alone and must be used with the alarm host.
2.All the alarm hosts in our store can be used with this door detector.
- The alarm host used to match the infrared detector must meet three conditions:
- Frequency: 433MHz
- IC model number: 1527
- Resistance 330K ohms
Working voltage: 1 pcs 12V 23A , the battery not included
Emission frequency: 433MHz (ASK)
Emission distance: ≥ 100m(open space)
Working temperature: -10℃ ~55℃
Installation: Door/Window
Installation: less than 15mm between part A and part B
Modulation Mode: ASK
Anti-theft security
- This door detector can detect when the door /windwo was be opened
- When the door/windwo was opened. it will transmit the signal to the alarm host.
3.When the alarm host receives the signal from the door detector, it will alarm. Then send the alarm signal to your phone.Notify you that a stranger has broken into your home.
Installation of door/window magnetic sensor
Load batteries in part A of the wireless door/window magnets and fix the same on doors/window frames to be monitored, and part B on the doors/windows, as close to each other as possible, as shown in Figure. (We recommend fix parts A and B with screws. The screw holes of part A are located in the mounting board, which should be punched using hard objects).
Test of door/window magnetic sensor
After installation, pull the antenna to the full length. Open the doors/windows to be monitored, the red light on the magnet will be on, at the same time, there will be alarming sounds and indication on both console and the handset. If the red light on the magnet is not on, please check whether the “Low volt indicator” is on. If it is, please replace the batteries. Otherwise, please contact the supplier.
