In-line/ Horizontal Optic Splice Closure GP01-H23JF4/16-24
$99.00 – $149.95
GP01-H23JF4/16-24 is suitable for direct splice or distribution of optic cable dia. ≦12.5mm or 16pcs drop
cable in aerial, pole-mounting, outdoor wall-mounting applications. Adopt high strength engineering
plastic, with aging resistant, anti-UV and anti-corrosion material. It is water-proof and anti-dust, simple
inner structure, easy installation and reopen. Is a good choice for secondary cable splice in FTTh project.
All Variations
| Image | SKU | Price | Stock | Box Type | Quantity | Add to Cart |
|---|---|---|---|---|---|---|
| FD-98415-01 | $99.00 | 0 in stock |
| ||
| FD-98415-02 | $114.95 | 0 in stock |
| ||
| FD-98415-03 | $129.95 | 0 in stock |
| ||
| FD-98415-04 | $149.95 | 0 in stock |
|
GP01-H23JF4/16-24 is suitable for direct splice or distribution of optic cable dia. ≦12.5mm or 16pcs drop cable in aerial, pole-mounting, outdoor wall-mounting applications. Adopt high strength engineering plastic, with aging resistant, anti-UV and anti-corrosion material. It is water-proof and anti-dust, simple inner structure, easy installation and reopen. Is a good choice for secondary cable splice in FTTh project.
Specification | Dia. (mm) At the biggest point | Max capacity | No. Of Ports | Available Splitter | Max. Adapter Number |
GP01-H23JF4/1 6-24 | 319.7*193*102 | 24 fibers | 2 pcs round on both side:Ф12mm 8 pcs drop cable ports on both sides:2*5 mm | 2pcs 1*8 splitter or 1pc 1*16 splitter | 16 pcs With simplex SC sized installation hole |
Mechanical sealing with Silicon rubber and Clip type lock. |
|
| |||
- Products Features:
- IP: 65
- Light weight, high mechanical strength, lighting protection, with long service life, etc.
- Optional 4pcs entry port blocker and 12~24fiber cable sealing rubber, for flexible use according to the function requirement.
- Available Adapter: 16 pcs SC adapter and 1pc 1:16 SC Micro PLC Splitter
- The closure and cable entry ports are sealed by Silicon rubber, stable function, easy to reopen and maintenance.
- Main Technical Parameter:
- Fiber Bending Radius≥37.5mm
- Return Loss:≤0.01dB
- Fiber length in the Tray: ≥1.6m
- Capacity: 24cores ( Single fiber)
- Working Temperature: -40℃～+70℃
- Lateral pressure resistance: ≥2000N/10cm
- Impact resistance: ≥20N.m
- Exterior Structure Diagram:
- Accessories Details
Item | Picture | Amount | Item | Picture | Amount |
Aerial mounting kits | 1set | Nylon tie | Max. 20pcs | ||
Abrasive paper | 1pc | Entry port block | 4pcs | ||
Cable ports seal rubber | Total 8 pcs (2 size) | Optic fiber joints protective tubes | Max. 24pcs | ||
Number sticker | 1pc | Wall mounting kits ( order as required) | 1 set |
- Installation Tips:
1. Fix the cable clip, put the cable through the silicon rubber, tighten the screw, and fix the cable strength member. |
| 2. Bare cable protected by transparent PE tube wind in the outer cycle. Splitter cable wind in the inner cycle. |
| 3. Fusion the fiber joints in the middle place of the splice protective tube. Heat the tube and place it in the splice tray orderly. |
4. Put in adapter and wind the cable in the closure, fix the excessive cable with nylon tie. |
5. Plug in the drop cable connector and tighten the cable clip. |
| 6. Put on the silicon rubber ring and use the Screwdriver to move the buckle to close the closure. |
.
（Optic Fiber Route Diagram） For wall mounting:
For aerial mounting:
Front side |
| Back side |
| Box Type |
Empty box ,1*4 splitter ,1*8 splitter ,1*16 splitter |
|---|---|
| Fiber Installation Type |
Horizontal |
| Fiber Typical Solution |
FTTH(Fiber to the Home) ,Industrial Installation |
